RadioLink AT9S DTF UHF Ready to go Combo

Better by miles !

Total £249.95

Availability: Out of stock

More Views

Description

RadioLink AT9S DTF UHF Ready to go Combo - Description

Everything you need to get started on your way into the wonderful world of long range FPV

Robs note:  A pre-assembled UHF transmitter capable of up to 20km range, ideal for your long range FPV aspirations

We have using DTF UHF for some years now with faultless results. 

The receiver with allow PPM and tradional signal so that you can use an AP like the MFD AP or direct control over your servos/ esc etc.

You can also get Digital or analogue RSSI output (switchable via solder pad)

The complete set contains:

1 x RadioLink AT9S, 9 channel transmitter (2.4ghz & 433mhz UHF)

1 x 2600mah Lipo TX battery

1 x Deluxe DTF UHF 1W transmitter

1 x DTF UHF 6 Channel receiver

1 x RadioLink 9ch 2.4ghz receiver

1 x Diamond SRH771 Transmitter antenna

1 x Mono UHF receiver antenna 90deg SMA

1 x 3D printed transmitter holder

1 x Rob's missing manual

Setup advice and retun to base programming / setup

 

 UHF Specifications:

Transmitter


DTF UHF Deluxe TX uses openLRSng. This 1-watt rated transmitter has a few new features making it easier to use and friendlier for FPV video frequencies. It uses Atmega32u4 microprocessor with Arduino Leonardo bootloader for built-in USB support: you don’t need an external programmer for configuring and flashing!

DTF UHF DeluxeTX Transmitter  New features:

  • • Integrated lowpass output filter to reduce interference on higher frequencies
    • Mini USB connector for direct connection to a computer
    • 2S-3S lipo power, no reduction in power with 2S lipo
    • Aluminium case
    • 59x45x19mm
    • 62 grams

The included PPM and Power cable will plug into the pins located in a JR-style module bay on the back of your controller. Controllers that have this bay include: FlySky 9x; Hobbyking 9XR; FrSky Taranis; and many JR radios.

Comes with openlrsNG software  Compatible with all transmitters that use openlrsNG. Full-range receiver.

 

First rule of OpenLRS: *DO NOT POWER ON WITHOUT A ANTENNA ATTACHED*

Receiver

Comes with openLRSng software. Compatible with all transmitters that use in openLRSng. Full-range receiver.

Features:

• Lowpass input filter to reduce out-of-band interference.
• PPM output up to 16 channels (enable in menu).
• RSSI output, digital (enable in menu) (can be turned into 3.3v analogue with a solder jumper).
• Completely user-settable frequency selections: 413MHz up to 453MHz.
• Up to 24 hopping channels, user-settable.
• Custom pin mapping.
• Wireless setting adjustment and bind, without any damage or harm on your aircraft.
• Can also be used as a transmitter.
• -121dBm rated sensitivity.
• 54x19mm size with pins and SMA.
• Around 6 grams with servo pins and SMA connector.

 

UHF Specifications:

Contents:

1 x AT10 2.4ghz radio transmitter with full colour display

1 x R10D 10 channel reciever

1 x PRM-1 voltage module

Specification

Channels: 10, 8-10 channels are customisable

Trainer output: PPM output, ideal for UHF

Speed: super fast 3ms

Switches: 2 x 3-position, 5 x 2 position, 1 x reset, 5 x positionable

Modes:  Heli 8 swash plates, 2 fixed wing, 4 glider

Data telemetry: Battery voltage, Temp, motor RPM, GPS etc

Precision: 4096

Compatible with all servos

 

Reviews

RadioLink AT9S DTF UHF Ready to go Combo - Reviews

Videos

RadioLink AT9S DTF UHF Ready to go Combo - Videos

No videos avaliable

Manual

RadioLink AT9S DTF UHF Ready to go Combo - Manual

No specification